Best Scar Treatment – What Does Science Say

Is there really just one best scar treatment? With so many scar treatment options available it’s often difficult to decide which one is best for you. Unfortunately most promise great results but then fail to deliver meaningful results. This article summarizes what works and what doesn’t based on the clinical and scientific studies available.

Commonscar treatment ingredients include:

SILICONE SHEETING & SILICONE GEL: Silicone improves the appearance of both old and new scars. Silicone sheeting is cumbersome to use and can interfere with make-up and clothing. Silicone gel (Dimethicone) is as effective as silicone sheeting and is much easier to apply. Easy make-up and sun-block application is an added benefit of the gel. Always check the ingredients to make sure the silicone is Dimethicone (certified as safe) and not potentially harmful silicones like D4 or D5 (eg Cyclomethicone, Cyclotetrasiloxane, Cyclohexasiloxane, Cyclopentasiloxane). These D4/D5 silicones are also volatile, meaning that they evaporate quickly after application on the skin. Because of this, the silicone benefit is very short-lived. Dimethicone silicone is not volatile and therefore stays on the skin much longer.

VITAMIN C: One of the skin’s main components is collagen. Scars heal through new collagen formation. Untreated skin produces unorganized, haphazard collagen. Vitamin C helps to improve and organize collagen formation. Improved collagen formation leads to faster and more cosmetic scar healing. Vitamin C also decreases inflammation and is often used to lighten dark scars and brown spots. The main problem with vitamin C is its stability. Most formulations contain unstable vitamin C which oxidizes on exposure to air. This is associated with a change in the color, typically a dark yellow or brown. While applying oxidized vitamin C is not harmful, it is no longer useful as the effectiveness of the treatment is lost completely. Avoid vitamin C creams that are brown to begin with as this is typically done to camouflage oxidation.

VITAMIN E: Topical vitamin E (tocopherol) may be good for preventing sun-induced skin damage but it has NO effect on, and actually may WORSEN the appearance of scars in up to 90% of adults. Up to 33% of users develop a contact dermatitis to vitamin E (redness, itching and flaking). American dermatologists and Canadian pediatricians recommend completely avoiding scar creams containing vitamin E.

TOPICAL STEROIDS: Most people know that steroids decrease inflammation. However, independent studies have shown that topical steroids have no effect in reducing scar thickness or improving the cosmetic appearance of scars.

ONION EXTRACT: Several scientific studies in humans and animals have focused on onion extract, one of the main ingredients in Mederma skin care products. All showed NO benefit from topical use. Mederma performed no better than plain petroleum gel (or Vaseline) for scar redness, itchiness, pain, burning, thickness and overall scar appearance.

BOTANICALS: Many skin care products include natural plant extracts (botanicals) as ingredients, mainly because of their anti-inflammatory effects. Examples include onion extract (see above), licorice, curcumin, aloe vera, green tea, ginko, ginseng, soy, tea tree oil, arnica, bromelain, sunflower oil, safflower oil and chamomile. Of these, only a few have been shown to improve scar healing and appearance:

Licorice Extract:

strong anti-inflammatory, accelerates skin renewal

lightens dark scars and brown spots including melasma (especially when combined with a stable form of vitamin C)

anti-acne effects (both prevention and treatment)
Aloe Vera:

accelerates wound healing

decreases inflammation

stimulates new skin growth through amino acids

promotes healthy healing in the deepest skin layers
Linoleic Acid (Safflower Seed Oil) and Oleic Acid (Sunflower Seed Oil):

regenerate lipid biolayer crucial for skin moisture

improve wound healing

improve scar elasticity

control production of prostaglandins, one of the skin’s main “building blocks”

prevent disturbance in prostaglandin production which causes poor healing

lighten dark pigment (hyper-pigmentation)
Surprisingly, most scar treatments contain volatile D4 or D5 silicones, vitamin E, steroids, onion extract, or combinations of these ingredients. All of these either do not improve scar appearance or texture, or even worse cause contact dermatitis. Of all the scar treatments frequently recommended, only stable forms of vitamin C, dimethicone silicone and a handful of botanicals have been shown scientifically to help fade scars.

Bike Sailing 21st Century Innovation Or A Science Project Gone Bad

With ozone-layer depletion a great issue nowadays, inventors are developing new ideas. The transportation sector in particular is getting all the bad publicity. And as carbon monoxide emissions become the focus of tighter regulations both in the US and Europe, the race for eco-friendly vehicles is on.

One of the inventors who rely on the powers of Mother Nature is Vladimir Zam. His wind-powered bike is designed with a triangular sail. The big question is: how will the bike run?

The design for US Patent 6932368 calls for a sail attachment to be linked to the bicycle harnesses wind to move the bicycle forward. A wind receiving sail is available at the attachment, which can generate the wind needed to power the bike.

Would the addition of a sail attachment qualifies it an invention? It looks more like a science project gone bad. Seriously, the design for this patent is an awkward cross between a sail boat and a bicycle. Considering that the patent retains most of the features of a regular bike, the sail attachment just complicate matters. Whereas, people could simply rely on their two feet to forward a bicycle.

Imagine yourself driving this thing around in the middle of the metropolis traffic jam. That is provided you could survive peddling a long the streets without being dragged through your sail by speeding vehicles. On the upside, well you could make money using this bike to money. For instance, why dont you convince your local pizza delivery store to advertise on your sail. Youll just have to capitalize on your endurance and be able to bike for three acres or until you drop dead, whichever comes first.

So what do you guys think? Is this an innovative invention or just a product of a man having too much time on his hands?

Benefits Of Educational Science Kits

Educational science kits are designed to supplement formal classroom education. These kits contain lab equipment, materials, manuals, and references to be hands-on to provide a holistic learning to students.

There are numerous benefits that educational science kits offer to students. A child is able to learn science experimentally with the help these kits. Experiential learning or learning by experience is essential for turning knowledge into wisdom for children. It helps a child to absorb more knowledge and ensures that the learning stays in the mind for longer time. Classroom teaching is not sufficient if you want your children to grasp more knowledge. Educational science kits make learning more effective for students.

Another crucial benefit of using educational science kits is that they make learning, a great fun. Classroom learning is believed to be boring because kids get bored listening to long classroom lectures. Science kits on the other hand make learning fun and enjoyable. Because these kits are hands-on, children are able to have fun while experimenting. For instance, a science weather kit produces thunder sound and lightening which entertains the kids and makes them grasp things in a much better manner.

Educational science kits are indeed the safest way to learn science. There are many theories and principles in science that can be understood only when demonstrated practically. There are science kits to explain functioning of electronic gadgets like computers, mobile phones, freeze, heaters, washing machines, air conditioners, and so on. These science kits include safe ingredients to ensure maximum safety to children while experimenting with them.

Science educational kits are essential for the child”s ultimate learning experience. They make learning fast, easy, and enjoyable. Educational science kits are available in educational stores, as well as at the online stores. You must always prefer to buy educational science kits from a reputable online store. There are a dozens of websites on the Internet that provide plenty of information about them. You can go through these websites to know more about the different types of science kits that they deal in. They offer you a plethora of options to choose from to make learning exciting for your child.

If you want to buy educational science kits for your child or want to know more about Physics lab equipment, physics laboratory equipment, school science lab supplies, please visit sciencefirst.com

Basics For Buying Science Laboratory Equipment

Equipping your school science lab with science laboratory equipment is no more a difficult task. You can conveniently shop for the lab equipment online these days. Just select the items that you need and make the payments. School science lab supplies will be delivered right at your doorstep. But there are some considerations that must be kept in mind while buying laboratory equipment supplies.

The first important consideration is to decide which all science lab supplies you need. This would primarily depend on the school curriculum and the experiments that would be conducted in the academic year. Every standard or class has got a unique curriculum and even within a particular standard, there are different science subjects for which specific science lab supplies are required. It would be better to make a list of physics lab experiments, biology lab experiments, anatomy lab experiments, environmental science lab experiments for different levels and then look out for the equipment unique to those experiments.

While there are many equipment that are unique to certain science projects, there are several items that you will find in every school science lab. Some of such science laboratory equipment are test tubes, beakers, flasks, pipettes, pipette bulbs, pipette fillers, funnels, evaporating dishes, watch glass, chemical spoons, stirring rods, Bunsen burners, lab safety goggles, gloves, microscopes, and lab coats among many others. You must buy such lab supplies as they would be required every now and then.

Next, you must decide how much to buy. When buying science laboratory equipment you must take into account the number of children in each class or those who will be attending the science lab experiment. It is advisable that you buy enough supplies so that no more than two or three students use a single set of science laboratory equipment. By having enough beakers, funnels, test tubes, and other laboratory equipment supplies you can ensure that no time is wasted in washing and re using the equipment and that the students are able to make the best possible use of the limited time allotted for physics lab experiments and biology lab experiments.

Finally, make sure that the biology lab equipment or other laboratory equipment supplies that you buy are manufactured keeping in mind the highest safety standards. They should be extremely safe to use and should not break or explode due to heating or chemical reactions.

For buying superior quality laboratory equipment supplies, you can log on to sciencefirst.com

Basic Materials Used In Making A Picoturbine Windmill For Your Science Fair Project

Magnet, copper wire, aluminum wire, screws and clips, cardboard, and wood are the basic materials to used in making your own PicoTurbine windmill science fair project.

A PicoTurbine is a small windmill structure functioning to produce a small scale electric energy. A windmill structure is a very suitable science project idea for renewable energy topics. It is an ideal science fair project because it can be built easily. The materials used to make such project can also be easily found in any hardware store. PicoTurbine windmill is basically made from the list of items below.

Magnet

The magnet is basically used to attach with the rotor disk place above the wooden base of the PicoTurbine. It’s securely attached with a double sided tape to a thick cardboard to function as a rotor mechanism. When the rotor spins the magnet’s magnetic field will release enough voltage to light the light emitting diode or LED.

Copper wire

A copper wire is used as a pathway of the PicoTurbine’s electric circuit. It is generally used in building the stator segment of the turbine. It is also use to transport the voltage in lighting up the light emitting diode or LED. Expose the copper wire on the end of the coils with sandpaper. Remember to get rid of any enamel left on the copper to have an efficient stator.

Aluminum wire

An aluminum wire is used to assemble the base and yoke of the windmill. Wrap the aluminum around the dowel. Bend and loop the aluminum wire with pliers to form the yoke as well. The yolk and dowel can then be placed on the center of a wooden base by screwing it with Philips head screw.

Screws and clips

Screws and clips are essential bearing parts that are used in assembling the different segments of a PicoTurbine windmill. A Philips head screw is specifically used to attach the yoke and the axle of the windmill. Retaining clips are metal clips that fastened the dowel to the rotor. Screws and clips are the joints and tendons of the whole PicoTurbine skeletal structure.

Cardboard

The cardboard is the base support of the paper blade and turbine patterns. A cut-out paper template is glued to the cardboard to give it more weight. A cardboard is also used to support the magnet and the rotor.

Wood

Wood is basically used as a foundation of the PicoTurbine. Since wood is a solid material and can easily be screwed, it is an essential base to hold all of the windmill’s parts. An 8? by 5? wood is the ideal size for an 8? PicoTurbine windmill. A half inch thickness of the wooden base is also a complementing support.

Prepare all the necessary materials completely before you will start building your PicoTurbine windmill. PicoTurbine windmill kits are also available in the market to ensure that you have all the materials that you need. Scissors, screw driver, and ruler are the tools that may come in handy.

Bachelors Of Science ( Information Technology )

COURSE COMPOSITION OF THE THREE YEAR INTEGRATED B.Sc. (Information Technology) DEGREE COURSE (3 Years Degree Course) (Total 6 Semesters, 2 Semesters per year)

This is three years degree course of the University of Mumbai giving scope in specialization in the field of Information Technology And admissions to the course will be conducted as per the guidelines and schedule announced by the University of Mumbal.
A Candidate for being eligible for admission to the Bachelor of Science Information Technology Degree Course should have passed he H.S.C. (Std.XII) Examination conducted by the Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent with MATHEMATICS & STATISTICS as one subject and should have secured not less than 45% marks in aggregate and 40% marks in aggregate in case of reserved candidates, at one and the same sitting.
Candidate who have passed Diploma (Three years after S.S.C. X th Std.) in Information Technology/Computer Technology / Computer Engineering/Computer Science/Electrical, Electronics and Video Engineering and Allied Branches /Civil and Allied branches are eligible for direct admission to the Second year of the B.Sc. (I.T.) degree Course. However, the Diploma should be recognized by the Board of Technical Education or any other recognized Government Body. Minimum marks required 45% aggregate for open category candidates and 40% aggregate for reserved category candidates.
OR
Candidates with post HSC-Diploma in Information Technology/Computer Technology/ Computer Engineering. Computer Science. And Allied branches will be eligible for direct admission to the Second Year of B.Sc. I.T. However, the Diploma should be recognized by the Board of Technical Education or any other recognized Government Body. Minimum marks required 45% aggregate for open category candidates and 40% aggregate for reserved category candidates Students coming from any other State Board in India will also be admitted to F.Y.B.Sc.(I.T.) Class . However, they will be required to produce Provisional Statement of Eligibility obtained from the Eligibility Section, University of Mumbai, Vidyanagari , Kalina or they will be admitted Provisionally subject to the Submission of Eligibility Form and the Demand Draft towards the Eligibility Fees as per the University Circular No. Elg /Cir/(39)/561 /2008 dated 22-5-2008.

B.tech In Computer Science

Computer Science is the base requirement of many industries. Until a few years back, owning a computer system used to be a status symbol; today it is a daily use article. So quality, updated computer education is the call of the time, and JRE Group of Institution provides you exactly that through its B.Tech, Computer Science program.

JRE Group of Institutions is one of the leading Institutes of India that provides Engineering and Management education.

Speaking about its Engineering course, it is one of the best Engineering Colleges in Delhi and is counted among the Top AIEEE Engineering Colleges in India. It is assured that JRE Groups Engineering Course, is among the best courses if you are planning to take Admission in an Engineering Course.

JRE Groups B.Tech in Computer Science, a study of the theoretical foundations of information and computation, offers a foundation which permits the students to adapt new technologies and ideas.
Computer Science branch of engineering has many sub-fields for e.g. computer graphics, computational problems, computational complexity theory, software engineering, algorithms, system architecture and much more. After doing B.Tech in Computer Science from the Top engineering colleges, an individual can find a good job in the renowned IT Company.
He can work in various areas such as:
1. Software Application: Software is a set of programs that has been created by the programmers. In the software development, there are two kinds of people i.e. System analyst and Software programmer. The work of System analyst is to develop computer programs. In this regard, he analyzes the system and studies the way things are working. And software programmers give detailed instructions to the computer for solving the provided problem. They usually work on descriptions and guidelines give by system analysts.
2. Sales and Marketing: Each company wants to develop its business more and more. In sales and marketing job, one can involve in selling the computer system and its marketing to various companies. We can define software applications and solutions selling activity as Business Development.
3. Support and Application services: In support and application services, an individual helps the customer in the purchase of the software. He guides him about the right kind of an application and for this; he also provides him the training of its usage.
4. Computer Operations: After this degree, one can work in computer operations. The computer operations involve handling of computer peripherals as well as other accessories such as CD-ROMs, disk drives, printers etc. So one can easily make one’s career in this field.
5. Programmers or coders: As a programmer, the employee writes the programs as well as tests them. He is also able to convert the strategies of the system analyst into working programs. As a programmer, there are so many requirements available in the IT industry. So after completing the study, one can easily start his career as a programmer.
The Admission in the B.Tech in Computer Science program is going on and will continue until all the seats are filled.
Rest assured, if you join JRE Group, our B.Tech in Computer Science program will open a lot of job opportunities for you.

B.tech (computer Science) Brings Lots Of Career Options

B.Tech (Computer Science), a study of the theoretical foundations of information and computation, offers a foundation which permits the students to adapt new technologies and ideas. This branch of engineering has many sub-fields for e.g. computer graphics, computational problems, computational complexity theory, software engineering, algorithms, system architecture and much more. After doing B.Tech (Computer Science) from the Top engineering colleges, an individual can find a good job in the renowned IT company. He can work in various areas such as:-

1) Software Application:- Software is a set of programs that has been created by the programmers. In the software development, there are two kinds of people i.e. System analyst and Software programmer. The work of System analyst is to develop computer programs. In this regard, he analyzes the system and studies the way things are working. And software programmers give detailed instructions to the computer for solving the provided problem. They usually work on descriptions and guidelines give by system analysts.

2) Sales and Marketing:- Each company wants to develop its business more and more. In sales and marketing job, one can involve in selling the computer system and its marketing to various companies. We can define software applications and solutions selling activity as Business Development.

3) Support and Application services:- In support and application services, an individual helps the customer in the purchase of the software. He guides him about the right kind of an application and for this, he also provides him the training of its usage.

4) Computer Operations:- After doing B.Tech (Computer Science), one can work in computer operations. The computer operations involve handling of computer peripherals as well as other accessories such as CD-ROMs, disk drives, printers etc. So one can easily make one’s career in this field.

5) Programmers or coders:- As a programmer, the employee writes the programs as well as tests them. He is also able to convert the strategies of the system analyst into working programs. As a programmer, there are so many requirements available in the IT industry. So after completing the study, one can easily start his career as a programmer.

In short, B.Tech (Computer Science) program brings a lot of job opportunities for the students. Sharda Group of Institutions also conducts this course at its affiliated engineering colleges. This institution has also acquired university status recently and after that it has become Sharda University now.

Astrology As Science In Our Life

There are nine planets, twelve houses and twenty seven Nakshatras governing the horoscope of a person, which forms the base of giving all type of predictions in a persons horoscope made on the basis of his time of birth, date of birth and place of birth. Each house represents scores of things or events in a person’s life.

Any thing and every thing can be predicted based on the planetary positions in the horoscope.

This science of Astrology reveals every aspect of a person’s life as soon as he or she takes birth on the basis of the horoscope prepared at the time of birth.

At that moment of time he or she sleeps for most of time doing nothing. But with the aid of astrological horoscope every thing can be predicated.horoscope For example, mental health, agonies, nature in great details. Similarly, health, disease, accident etc. which will overtake him and what care and caution has to be taken are all correctly predicted. Persons rise, growth, finance, life style, set backs, married life, divorce, name, Fame, children that is, every thing is correctly predicted at the time of birth itself governing future in all respects.

It is astounding that this Scientific Astrology can reveal every thing at a time when the newly born is doing nothing. This is the beauty of this science that identifies the destiny of a person for all times to come from the birth till death in all aspects. When it comes 100% true then comes the truth that destiny is pre-determined at the time of birth and cannot be changed by any means unless the person taken rebirth. When the person grows in age and start working, and the things happen in the same very as predicted at the time of birth, then it can be assuredly understood that destiny in all respects was sealed for all times to come i.e. predetermined at the time of birth. Even mode of death can be correctly predicted i.e. long term, slow or instant death through accident, massive heart attack or even by murder. Nothing can be changed.

This science is defamed and harmed by so called astrologers who with little knowledge of this vast science prescribe gems, Rudraksh, tantra, mantra etc. to overcome or reduce the evils and charge fantastic sum of money. Are they Gods? Can they change the planets of a person’s horoscope and change the destiny? Not at all. They are human beings. Why do not they change the destiny of his family members, close relatives, avoid diseases, make them rich and avoid death or mode of death. I am a scientist and scholar. I earn money as this class of so called astrologers earn ten to twenty times more money by prescribing remedy and earning easy by fraud means.

For the first time in 1985. When I was honored with the heighest Indian degree Jyotish Maha Maho Paddhaya at the world congress of astrology at Ahmedabad (India). I was asked to deliver speech before a huge gathering of astrologers from India and abroad and was given only five minutes to speak. As I had been a high ranking officer in Government, I was supposed to be a responsible astrologer. I chose the subject Astrology as I saw it, found it and experienced it. Earlier various astrologers in their speech were propagating various methods to remove of cure the evil by means of tantra, mantra, wearing stories, worshiping Gods, etc as if they are Gods in the form of human being.

When I started delivering speech exposing such frauds committed in the name of Astrology for earning easy going money and thus defame this noble science and that destiny cannot be changed even a bit by any means, on the dot of sixth minute I was asked to finish the speech, the whole house literally stood up and asked me to continue the speech. I spoke for twenty minutes and got biggest applause and hand clapping of lifetime from the whole crowd. I have practical examples of a jeweler who had heart attack. I saw a unique combination in his horoscopes that he would die in a state of coma. The person who consulted are confirmed that the jeweler was in a state of coma. I predicted that he would die shortly. The reaction of the person was adverse. He said that the family astrologer says that there is no question of death, He is going to be cured and has long life. For this purpose “Maha Mritungaya Yagna” is being performed for seven thousand five hundred dollars equally and half lac of Indian rupee. I disagreed and said that the whole money will go in gutters, as the death and mode of death cannot be changed as this was decided at the time of birth. He died in three weeks. The main person who conducted it pocketed the whole money. This proves that destiny cannot be changed by any means. Even Gods like Bhagwan Ram Chandra ji and His wife Goddess Sitaji when took birth in human form had to suffer. Shri Ram Chandra ji was banished form the kingdom for 14 years. His wife felt so humiliated that died of her own will. By invoking mother Earth to take her inside which happened according to the mythology. The well known astrologers of that Era sage Vashishta and sage Vishwa Mitra could not do anything and were mere spectators. If assassination of Smt. Indra Gandhi, Rajiv Gandhi, Indian Prime Ministers took place, the planetary combination signifying assassination was in their horoscopes and this was the destiny predetermined at the time of birth. Every body makes effort except insane person. It is the luck factor governed by planets is the chart he would become Bill gates from nobody, the richest person or for that matter some one would become Prime Minister etc.

However, this noble science of Astrology gives you vision in all respects and you can make enhance planning. If it is indicated that speculation, gambling or share market is going to give you losses, you can avoid doing so. In certain cases and situation one can make his will, so that there are no disputes. If any, ailment is indicated, are can take timely precautions to avoid suffering. Things would occur but intensity would be reduced. If separation in married life is indicated. The partner can be selected who goes are tours regularly to avoid the crisis and salsify the used of the planets. Planning and guidance are all available along with do’s and don’ts. So this is the beauty of this noble science.

Amadeus Consulting discusses Art + Science in Custom Software Development

As someone who has witnessed the amazing changes in custom software development over the past 25 years, I have seen the vast improvements that both the Art and the Science of technology have experienced. While they once stood independently, those two principles have definitely converged. Personally, though I have been in the development world for a while, I am still amazed at the level of creativity, technology and change that we see every year. Could anyone 20 years ago have pictured the capabilities of Silverlights Deep Zoom? Or Flashs level of glossy interactivity?

One of Amadeus Consultings Guiding Principles is to Develop great software with both science and art,” because we feel so strongly that these two software development factors converge to make the most successful and inspiring technology for our clients. To us, science means how you use something, and art is not only how something looks, but how you interact and think about something.

Lets walk a little bit through the history of the two principles and see how they have finally come together to form and create the tools, Websites, and software we all use every day and at Amadeus Consulting.

We have Science, but wheres the Art?

The time was 30 B.C. (Before Creativity) also known as the eighties, most people associate with the time of DOS and very minimalistic looking user interfaces, simplistic inputs and structure, structure, structure.

When COBOL was the primary development language, there really was not much of an Art to any of it, computers simply had not been thought of as a medium for wild creativity. Sure there were games, and word processing programs, but the design was pretty flat, very text driven. The only real artistic consideration was the background color, which certainly felt exciting at the time. I even remember my go-to method for text placement, counting pixels! (Can you imagine asking anyone to do that day-to-day now?)

Art + Science, working side-by-side

Fast-forward to 15 years ago or 15 A.D. (After Design). With the introduction of HTML 1.0, customization and art were starting to trickle into custom application programming, allowing people to not only choose background colors, but different fonts, font colors and even pictures. The science and art of software programming were working side-by-side, and often as is the case with tricky technology, against one another.

As this was the Web 1.0 phase of the Internet, the level of interactivity from a user standpoint was zero. If you lacked the technical skills to be a custom programmer, you interacted with the Internet in a very static and read-only way. One of the difficulties I remember having is getting photo and text to line up with one another. Because the tools for text input were far more developed than for graphical input, getting a photo in the right place required a lot of trial and error.

The Marriage of Art + Science